Cleaning products:Various bearing parts

Cleaning material:
Dust particles, oil stains, etc.

Cleaning requirements:
Without the use of CFCs, the removal of grease and oil from stainless steel bearings can achieve the same cleanliness as the usual solution cleaning in the past.

Previous cleaning methods:
Solvent or steam cleaning with trichloroethane

Recommended treatment method:
-Immerse the bearing horizontally in a 40KHz heated ultrasonic bath for 5 minutes. The bath contains a semi-aqueous solution with a temperature of 52°C and a high-concentration solution.
-Rinse for 90 seconds with an ultrasonic overflow in hot water at 66°C at a flow rate of 0.3GPM. The sewage enters the separation tank that can separate dirt or hydrocarbons from the water.
-Rinse for 3 minutes in three cascade tanks in hot water at 71°C with a flow rate of 1.5GPM.
-Use an air knife to blow, and then use a hot air dryer to dry, the drying temperature is 116°C


Cleaning system:
Semi-aqueous agent or continuous treatment and cleaning equipment with dryer

Process advantages:
-Enhance the ability to clean ions and organic dirt
-No need to change the grease or lubricant currently applied in the manufacturing process
-Better process control-simple processing technology without complicated monitoring
-Conducive to environmental protection-separating organic dirt and hydrocarbons from sewage, effectively maintaining equipment